IR LED Chips > 1000 nm

  Product Typ. Wavelength Wavelength Unit Typ. Brightness Brightness Unit Measurement Current Size Typ. Chip Height Polarity Data Sheet Inquiry
LA PI14WP1 50 LA PI14WP1
1025 nm 15 mW 100 mA 360 µm 175 µm n side up
LA PI42IP1 50 LA PI42WP1
1025 nm 100 mW 700 mA 1060 µm 200 µm n side up
ED 14MIR3 50 LA RI14IP2
1350 nm 3 mW 50 mA 350 µm 150 µm p side up
LA RI42IP1 50 LA RI42IP1
1350 nm 40 mW 700 mA 1060 µm 200 µm p side up
ED 14MIR3 50 v2 LA SI14IP2
1450 nm 3 mW 50 mA 350 µm 150 µm p side up
LA SI42IP1 50 LA SI42IP1
1450 nm 35 mW 700 mA 1060 µm 200 µm p side up
LA PI14WP1 50 v3 LA TI17IP1
1550 nm 15 mW 150 mA 405 µm 175 µm p side up
LA TI42IP1 50 LA TI42IP1
1550 nm 30 mW 700 mA 1060 µm 200 µm p side up
LA UI14WP1 LA VI14WP1 300 LA UI14WP1
1650 nm 1 mW 20 mA 350 µm 180 µm n side up
LA UI14WP1 LA VI14WP1 300 LA VI14WP1
1720 nm 1 mW 20 mA 350 µm 180 µm n side up
LA WI14WP1 300 LA WI14WP1
1900 nm 1 mW 20 mA 350 µm 180 µm n side up

LED chips over a broad wavelength spectrum

WHITE LED-CHIPS FROM 2500 - 10000 KELVIN

For white LED chips, we do not speak of wavelength ranges, but of color temperatures, typically specified in Kelvin for white. The warm white temperature is 2200K or 3000K, neutral white is around 4000K, followed by cool white from 5000K. White LED chips and components are mainly known from general lighting applications such as spotlights, luminaires and lamps. For luminaires, the unit in lumens is a measure of how much light a light source emits. The unit watt, on the other hand, indicates how much electrical power is consumed. Lumen to watt is thus a measure of the efficiency of a light source. In addition to the applications already mentioned, white LED chips can also be used as indicators in industry. A high proportion of warm white LEDs can still be found in lamps for general lighting.

  • Color temperature
  • Warm white
  • Cold white
  • Neutral white
  • RGB
  • Lumen
UV LED-CHIPS FROM 260 - 425 NM

The UV wavelength range extends from about 100 nm to 400 nm and is significantly higher in energy compared to the visible range of light. Indium gallium nitride (InGaN) has proven suitable as LED semiconductor materials for generating long-wave UV radiation around 400 nm, and aluminum gallium nitride (AlGaN) for short-wave UV radiation. The wavelength of UV radiation from UV LEDs is typically between 400 nm and 250 nm. Interesting application fields are exposure, spectroscopy, curing, printing, coating, medical instruments, industrial imaging, disinfection systems, sterilization, chemical and biological analysis, UV inspection systems.

BLUE LED-CHIPS FROM 425 - 475 NM

Blue light not only glows blue, but is an integral part of the color spectrum. Without blue, there is no white.
Blue-emitting LED chips based on indium gallium nitride (InGaN) are combined with a yellowish luminescent layer (converter) located in front of the LED chip, which acts as a wavelength converter, resulting in a white-emitting LED.

Another method to achieve white light is to mix red, green and blue as additive color mixing. Since red and green LED chips were available first, they alone could not be used to produce white LED light. With the development of blue, the third basic color is available. Now the three colors can be overlapped to white light, the RGB mixed white.
Thus, 2 fundamentally different methods are available to generate white light: blue with converter and RGB mixing, which are more suitable depending on the application.

General application fields of blue LED chips are general lighting, projection, high current operation, architectural lighting, outdoor lighting, sensing and many more...

CYAN LED-CHIPS FROM 475 - 515 NM

Cyan or turquoise LED chips or also called Verde, are like the blue LED chips from the material group InGaN. Due to their properties, just like blue LED chips, they are particularly suitable for applications in medicine, lighting and displays or also for backlights. Cyan is particularly suitable for improving the color quality of white. This requires an LED package in which several chips in cw/ww/cyan/red are integrated.

GREEN LED-CHIPS FROM 515 - 555 NM

Like the white and blue LED chips, green LED chips are from the InGaN material group. Their properties make them particularly suitable for applications in medicine, lighting, backlights or displays. Green light sources in particular are used in smart watches with a function for measuring vital signs and thus also have many potential applications in sensing technology.

YELLOW LED-CHIPS FROM 555 - 597,5 NM

Yellow LED chips from the aluminum gallium indium phosphide (AlInGaP) material group are particularly suitable for applications in medicine, lighting for luminaires and displays, backlights and in the automotive sector for one of the main applications in turn signals.

ORANGE AND RED LED-CHIPS FROM 600 - 680 NM

At the latest with the mass production of red LEDs in the 1970s, the advance of this technology into many applications could no longer be stopped. All other developments around the wavelength spectrum are based on this foundation. Red LED chips or LEDs are widely used in automotive lighting, general lighting, architecture, indication lighting, sensor technology, ...

INFRARED LED-CHIPS FROM 680 - 1000 NM AND > 1000 NM

The range of non-visible light plays a decisive role for sensor technology. IR LEDs are used in simple data transmission systems such as infrared remote The range of non-visible light plays a decisive role for sensor technology. Original areas of application for IR LEDs were in simple data transmission systems such as infrared remote controls or the infrared interface IrDA. Other areas of application include alarm and security technology, for example in light barriers, motion detectors, night vision devices and surveillance cameras, cell phones, encoders, precise length and angle measurement, MachineVision, Industry 4.0, robotics, mechanical engineering.
 
 
 
 
 
 
 
 
 

Optoelectronics is our expertise

  • Offer of miniaturized light sources
    Special requirements, for example in sensor technology or medicine, often require particularly small light sources such as point light sources. We have an idea.

  • Specification for your project
    In our range of extensive optoelectronic components we will find the right solution for you together.

  • Sorting according to customer specifications
    At Chips 4 Light, we have the equipment to precisely sort the required quantity in the required specification on film, gel or waffle pack with our LED chip sorters.

  • Long-term storage
    In our dry storage cabinet we store LED chips professionally in gel- or waffle-pack for a longer period of time to support the project runtimes of our customers.

 

Inquiry for Optoelectronics

LED Chip Umsortierung auf Gel und Wafflepack small

We will gladly advise you!

Contact Us

Frequently asked questions

LED Chip

What is a LED chip?


We at Chips 4 Light work with optoelectronic semiconductors and distinguish on the one hand in LED chips or as a synonym for chip bare die, die or dice and LED components on the other hand. LED chip defines the pure semiconductor without substrate, encapsulation material or optics. The contacted chip is the actual light emitting source. The LED chip is a semiconductor crystal consisting of layers of differently doped semiconductor materials.
In one semiconductor layer there is an excess of positive charge carriers, while in the other layer the negative charge carriers are in the majority. The chip is installed in a package. This so-called LED package leads the electrical contacts to the outside and contains the conversion layer (phosphor) for generating white light. The package also accommodates other functions, such as protective circuits, optical lenses or elements for heat dissipation.

LED Component

What is a LED component?

If the chip is contacted on a carrier (ceramic, FR4, pre-molded leadframe...) and encapsulated, installed in a housing, then we speak of an LED component. The component, called a light emitting diode, is the quasi finished component, which can then be soldered onto a circuit board or built into modules or luminaires. Here, various parameters such as heat generation in the component, radiation characteristics, luminous flux, ... must be taken into account to ensure that the service life of the diode is not negatively affected. We are happy to advise you on the correct handling or packaging of LED chips and on the development of chip on board (COB) solutions, SMD or radial components.

Chip, SMD or Chip on Board

Only a LED chip, SMD or chip-on-board (COB) device?

The unmouned LED chip allows, among other things, to keep the design very small or to realize different functions on one board by combining several chips in, for example, RGB modules. Do you have to fulfill one or all requirements with your applications? We meet your challenges with an extensive LED chip portfolio for specific applications in high-resolution sensor technology or medicine. The focus is on miniaturizing the light source to keep the complete system as small as possible. Regardless of these applications, our portfolio includes LED bare dice that are designed for

  • General Lighting
  • Signage
  • Automotive
  • Consumer applications